SKIDFREE® - ANTI SKID (FLOSIL SKIDFREE®)
/

Zero Incident Anti-Slip Coating

Product Description

The SKIDFREE® anti-skid system designed, produced by Flosil-BET is an innovative product to prevent accidents/incidents due to skidding.

The proprietary SKIDFREE® anti-skid system has been designed in a way that prevents falls and slips usually associated with staircases, ladders and accesses.

  • “GLOW-IN-THE-DARK” coating – visible in the dark.
  • Can be custom designed to any configuration.
  • Exceeds the ANTI-SLIP requirement of ASTM E303-93(2003)
  • Passes Surface Friction Test (SIRIM REPORT NO. 2006KL0188).
Colour All RAL, BS Colours
Finish Glossy, Semi Glossy, Matt
Volume Solids 90 ± 3%
Mixing Ratio 1:1 By Volume (Part A : Part B)
Typical Film Thickness 150μm dry
Pot Life 90 minutes @ 35°C
Theoretical Coverage 3.8 Sq.m /liter at 250μ DFT
Method of Application Roller, Brush
Touch Dry 4-6 hours
Hard Dry 12 hours @ 30°C
Full Cure 3 Days
Minimum Over-coating Period 4 hours at 30°C
Maximum Over-coating Period 72 hours at 30°C
Surface should be clean and dry prior to over-coating. If ANTI-SKID has been exposed for long periods, fresh water washing should be conducted before application of any coatings.

Systems and Compatibility

  • Can be applied as finish coat on AQUA SEALER, AQUA ST, AQUA ST-03, AQUA MASTIC.
  • Please consult Flosil-BET Coatings (India) Pvt Ltd for further product recommendations.
Abrasion Resistance Max 70mg weight loss per 1000 cycles - 1kg load - CS10 Wheel - ASTM D4060
Impact Resistance 27 Joule - ASTM D2794
Dry Heat Resistance 120° C - ASTM D2485 after full cure
Pull - Off Adhesion 10.66 Mpa - ASTM D4541
Scratch Hardness 12.5 kg Load - No Failure - (BS3900 Part E2)
Salt Fog Resistance Excellent, Unaffected after 2000 hr Exposure - ASTM B117
Cyclic Fog / UV Exposure Excellent, Unaffected after 2000 hr Exposure - ASTM 5894-05

POSSIBLE APPLICATIONS

  • Marine and Offshore Gangway areas and railings
  • Industrial Floor Coatings
  • Stair Case Slip protection
  • Industrial structural Gangways
  • Hospitals
  • Play Area, Stadiums
  • Bathroom Flooring
Air Temperature 5-50°C
Substrate Temperature 5-55°C
Relative Humidity 50% minimum, 90% maximum
Surface temperature shall always be at least 3°C above Dew Point. Do not expose the coated articles where there are chances of condensation on the surface.

Mixing

ANTI-SKID is supplied in 2 parts, a liquid binder (Part A) and a liquid binder (Part B). Always mix liquid (Part B) into the liquid (Part A) while stirring. 75-100 RPM mixer is recommended.

  • Standard Packing Size = 4 L (Mix Paint)
  • Larger pack sizes of 16 L & 20L available on request.
  • Shelf Life: 24 months* from the date of manufacturing

*Material to be stored in sealed and unopened containers in closed shelter.

TYPES OF ANTI-SKID SYSTEMS

Nosing plate

Ladder Rungs

Floor Mat

Anti – Skid Strip

DULANG B OFFSHORE PLATFORM - MALAYSIA

Before

During

After

After

Anti skid system attached on the existing stairs in five star hotel

BASF Petronas Staircase

CONTACT /
GET IN TOUCH WITH US
Flosil-BET

No:40, Velichai Village,
Vandalur – Kelambakkam Road,
Chennai – 600 048.