AQUA FLOORCOAT (FLOSIL FLOORCOAT)
/

Self Levelling Industrial & General Flooring

Product Description

Aqua Floor Coat is a solvent-free epoxy coating that has excellent chemical and abrasion resistance, impact resistance and adhesion. It has outstanding self-leveling appearance, no crevices and bacteria can dwell low maintenance requirement. Suitable to use where durability is required with cleanable. floor surface is required, good abrasion resistant to with standard light vehicular traffic, etc.

  • Clean Room Applications
  • Self Levelling
  • Tough, Durable, Easy to Maintain
  • High Volume Solids, Low Viscosity
Colour All RAL, BS Colours
Finish Glossy
Volume Solids 98 ± 2%
Mixing Ratio 5:1 By Weight (Part A : Part B)
Typical Film Thickness 2 - 3mm dry
Pot Life 50 ± 20min @ 25°C
Theoretical Coverage 1.3 Sq.m /kg at 3mm DFT
Method of Application Roller, Rake, Trowel
Hard Dry 24 hours @ 30°C
Full Cure 7 Days
Minimum Over-coating Period 24 - 48 hours at 30°C
Maximum Over-coating Period 72 hours at 30°C
Surface should be clean and dry prior to over-coating. If Aqua Floorcoat has been exposed for long periods, fresh water washing should be conducted before application of any coatings.

Systems and Compatibility

  • Can be applied as finish coat on AQUA ST, AQUA ST-03, AQUA MASTIC.
  • Can be overcoated with AQUA PU.
  • Please consult Flosil-BET Coatings (India) Pvt Ltd for further product recommendations.

POSSIBLE APPLICATIONS

  • Automotive Industry Flooring
  • Industrial Floor Coatings
  • Chemical Industries
  • Office Spaces
  • Hospitals
  • Laboratories
Air Temperature 5-35°C
Substrate Temperature 5-35°C
Relative Humidity 85% maximum
Surface temperature shall always be at least 3°C above Dew Point. Do not expose the coated articles where there are chances of condensation on the surface.

Surface Preparation

Surface to be clear from oil, grease, dust. Primary wet cleaning and air drying follwed by application of Penetrant coat (AQUA ST). Refer to Flosil-BET for recommendation on required surface preparation

Mixing

Aqua Floorcoat is supplied in 2 parts, a liquid binder (Part A) and a liquid binder (Part B). Always mix liquid (Part B) into the liquid (Part A) while stirring. 75-100 RPM mixer is recommended.

Thinning

Not Recommended

  • Standard Packing Size = 16 L & 20L (Mix Paint)
  • Smaller pack sizes of 4L available on request.
  • Shelf Life: 6 months* from the date of manufacturing

*Material to be stored in sealed and unopened containers in closed shelter.

SELF-LEVELLING FLOORING

Before

After

Before

After

Before

After

Before

After

CONTACT /
GET IN TOUCH WITH US
Flosil-BET

No:40, Velichai Village,
Vandalur – Kelambakkam Road,
Chennai – 600 048.